Tips for The Average Joe

The Importance of Colors of Underground Utility Lines

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

Sometimes, even if the lines are marked accidents still happen. It is said that every 6 minutes, there is a utility line that is struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Below are some of the colors used for different utility lines.

If you see white lines, then these are proposed excavation sites. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. View here for more.

Refer to: https://allaboutcolorcodes.tumblr.com/post/182192189192/standard-colors-for-your-underground-utilities

You may also like...